Increased Safety High Voltage Terminal Enclosures - HV Series
Increased Safety High Voltage Terminal Enclosures - HV Series
The HV4X(6) series of increased safety high voltage terminal enclosures feature a single door style with clamped cover and are available in stainless steel 316L or 304. The one in/one out connection series is designed for shielded or unshielded cables up to 8kV at 500A per phase, while the two in/two out connection series is designed for two parallel unshielded cables up to 1.1kV at 1000A per phase. The HV4X(6) series is offered in sizes from 24"x12"x6" to 60"x36"x16" for the 1 x 1 connection series and 20"x20"x8" to 60"x36"10" for the 2 x 2 connection series.
Standard Features
Standard Features
• Type 316L Stainless steel cover clamps and screws
• Continuous piano hinge with removable stainless steel hinge pin
• Three porcelain insulators (1x1) or three mechanical connectors (2x2)
• One-piece, NEMA 4 / IP66 water-tight gasket
• Internal/external grounding provisions
• Welded-on mounting feet / tabs
• Ambient temperature range -40°C to +70°C
• Padlock hasp and staple
Design Options
Design Options
• Gland Plates (6” depths or greater) with continuous gasket
• Painted steel or stainless steel inner mounting panel
• Drilled entries / cut-outs
• Stopping plugs and breather / drain
• Terminal block assemblies and ground bars
• Cable glands
• Window kits
• Custom sizes
• Multiple coating options for additional corrosion resistance
• Cable clamps (1x1 only)
• Various insulator or connector configurations
Material
Material
• Enclosure and gland plates Type 304 or 316L
• Cover clamps and screws are 316L
• NEMA 4 / IP66 water-tight gasket
• Box / cover constructed from 14 gauge (0.75) stainless steel with #3/#4 brush finish
• Gland plates constructed from 10 gauge (.1345) stainless steel with #3/#4 brush finish
• SIlicone gasket
• Gland plate gasket constructed from 1/8” Bisco silicone with Acrylic PSA
